Technical Data Sheet
1. PRODUCT NAME
A high solid, Clear acrylic sealer and water
repellent for concrete and brick surfaces.
2. PRODUCT DESCRIPTION
a high performance acrylic sealer, which leaves a protective
membrane on the concrete surface that both waterproofs and
seals. It contains no silicones, waxes, or oils, and does not
chip or peel when applied properly. Formulated with methyl
methacrylate copolymer resins, aromatic solvents, and special
additives which result in an extremely tough acrylic surface
that has many special qualities. Renew-Crete® Sealer penetrates
deep into the concrete pores providing unusual durability and
protection. Treated surfaces shed water, dirt, soot and chemical
contaminants to prevent staining and moisture damage to the
matrix. It will also enhance the color of integral colored
concrete or exposed aggregate concrete by giving it a "wet
glossy look". Because of the unusual characteristics of
this formulation, it may be used for many different
Brightens and weatherproofs exposed aggregate
walls and sidewalk areas.
Dries hard - will not attract dirt, airborne
dust or grime.
Reduces moisture entry into concrete surfaces
and helps prevent efflorescence.
Is quick drying - dry to touch in 3O-4O
Renew-Crete® Sealer is widely used on
concrete and brick substrates to protect against soiling by
airborne contaminants or other materials, which by absorption
would cause unsightly substrate discoloration. Renew-Crete®
Sealer offers surface protection plus water repellency and color
Patterned & Stamped Concrete: It is
particularly effective on textured patterned concrete surfaces
where the irregular texture pattern readily traps dirt and other
particles causing discoloration.
Decorative Polymer Concretes: Provides a
high performance, tough, durable, protective, topcoat seal.
Enhances the color of surfaces and provides additional chemical
and abrasion protection.
Concrete Pavers: Brings out color &
protects paver from fading or color change due to weathering.
Helps seal against spillage.
Light Weight Concrete Block: Penetrates
into concrete block pores for in-depth protection against
moisture. Retards the moisture exchange in concrete that brings
soluble concrete salts to the surface.
Architectural Concrete: Reduces lime
leaching which can etch tinted colored glass, aluminum, etc.
Brings out the fresh wet look color of aggregates.
Common and Face Brick: Prevents stains
from penetrating into the brick surface. Dried film provides
protection against chemical attack and makes brick easier to
Rhino-Grip® is a micronized crystalline
polymer that is specially machined to provide a unique
texturizing (slip resistant) aggregate for Renew-Crete®
Sealer. The particle size is carefully controlled to produce
a uniform moderate textured type surface. The rounded shape of
Rhino-Grip® particles will provide optimum abrasion resistance
without irritating sharp edges thus allowing for easier surface
cleaning than other aggregate textured surfaces. Rhino-Grip® is
gentle to bare feet when compared to silica texturing type
aggregates making it a high priority item for pool decks and
KEEP OUT OF THE REACH OF CHILDREN
Contains a petroleum distillate Keep away
from heat or open flame
Clean brushes, tools, sprayers, rollers and
other equipment with lacquer thinner, toluene, or Xylene.
200 to 400 square feet per gallon (4.9 to 9.8
m2/liter) depending upon usage. Coverage varies with
texture and porosity of surface.
55 gallon (209 liter) drum
5 gallon (19 liter) pail